Blue Electronics Design Solutions

LED Skin Treatment Product.

For our longstanding American Client, based in Florida. A safe, FDA medically approved electronics control and drive electronics was specified by the client.

The product has 2 sides one side ultraviolet led’s and the other side Red led’s for treating skin conditions.

The led arrays needed to be timed for the specified user treatment and automatically turn off following the treatment time.

On completion of the treatment time the device would bleep to indicate the treatment was over. With a soft start and soft stop to allow the user to turn the device away from the eyes in the event of accidentally turning the device on while looking at it as this could be painful and possibly damage the eyesight.

The device would be powered from the mains with a simple wall power supply.

Many safety features were incorporated as required by FDA approval before release to market. Including auto shutdown in fault. Fail safe in the event of a firmware failure. Temperature and power monitoring plus many others were included as safety features.

The product is currently in worldwide distribution with a number of variants that have been developed with the client and included in the product range.

Services supplied:

• Electronics design.

• PCB design.

• Mechanincal integration of electronics systems 3D CAD.

• Closed loop control.

• FDA Submission support documentation.

• EMC Submission support documentation.

• Manufacturing Support

Development time - 12 Months.

ACTIVE NITROGEN MANAGEMENT SYSTEM

Spectroscopy support management system.

UK based client company maker of spectroscopy instrumentation.

The requirements brief was to develop an automated nitrogen management system to replace the manually regulated system.

An electronics platform that would measure the flow rate of the required 3 channels and actively manage the flow rates for the 3 channels. The electronic platform would be an integrated part of the spectroscopy system provided to the end user by the client company.

Via a USB interface a PC running the system configuration and monitoring software would be used to update and retrieve the system parameters in real time. the monitoring software was developed completely as part of the project and exclusively for the client.

The software and hardware working to gather to monitor and set the flow rates for each of the channels. Alarms could be set for loss of flow. Wake up and initialisation events could be set to ensure the system would be up and running ready for operation as the system required nitrogen purging for significant periods before operation cloud commence.

Full reporting in chart and file export is included along with remote monitoring over the internet. The system once set will autonomously operate with the PC disconnected.

The product is currently in worldwide distribution.

Services supplied:

• Electronics design.

• PCB design.

• Closed loop control.

• PC software development.

• Communication protocols required for communicating PC to Electronics (USB).

• I.O.T communications from system over the internet for remote monitoring.

• Data capture and reporting.

Development time - 6 Months.

Countapunch Product.

The client a retired Professional Boxer wishing to establish a range of sporting goods.

This product is an active training aid for personal and commercial gyms allowing the users to quantify their performance over time in the same way other athletes can with sports watches.

The device would be attached to an existing punchbag or supplied as part of a complete product with a punchbag. It would be rechargeable therefore not trailing wires during use.

The device would count punches. Measuring motion with accelerometers, gyroscopes and magnetometers. It would calculate punch speed, force and momentum of the punch bag. Along with pressure sensors. The data would be transmitted in real time from the punchbag to a tablet or smart phone app which would run training and analysis functions to log performance during training.

Included would be an option for online gaming where the user could compete against other users over the internet either in the same location or remote locations to determine the winner and be listed on the leader board.

The client being a professional boxer would be the target to beat on the leader board for those wishing to try.

The product is currently is currently still in development.

Services supplied:

• Electronics design.

• PCB design.

• Firmware development.

• IOS Android APP software development.

• I.O.T communications from system over the internet for remote monitoring.

• Data capture and reporting.

• Gaming development.

Development time - 12 Months and ongoing.

Core Controller Project.

The client is an individual developer and a long-term client of ours based in USA.

The product is a power generation distribution device. the project brief was to develop a system for monitoring the efficiency of the power device.

It derives its power from the mains input to the device and safely isolates the user.

With a full colour touch screen, it calculates the power usage for each of the channels and displays each on the display.

The efficiency is also calculated.

Numerical and graphical displays are user selectable.

Long term data is stored on the included SD memory card and uploaded to a web server over Wi-Fi.

Remote monitoring is provided through a web interface.

The product is undergoing final testing and is due for release on a crown funding site for initial development release.

The product is currently is currently still in development.

Services supplied:

• Electronics design.

• PCB design.

• Firmware development.

• I.O.T communications from system over the internet for remote monitoring.

• Data capture and reporting.

Development time - 6 Months.